Magnetized Supersonic SprayDust Removal Solution

Magnetized Supersonic Spray Dust Removal Solution

It mainly solves the dust leakage at the blanking port, dust issue at the tail of the belt & corridor, etc.

Magnetized ultrasonic siphon pneumatic fog curtain dust control technology

Supersonic siphon atomization dust separation efficiency up to 94.07% which is better than traditional ultrasonic atomization method (only 84.75%). Dust removal efficiency increases 25% also the escaperate of coal dust is 1/2.

The dust removal rate is about twice that of the traditional method, the water consumption is approxim ately 1/10, and the gas consumption is approximately 1/3. In addition, the nozzle instantaneous dust removal efficiency is 2~3% higher than that of the ultrasonic atomization method, and the total dust efficiency is the same. At the same time, the proportion of exhaled dust is reduced by 3%.

Through supersonic anti-gravity siphon magnetic fog nozzle, the technology creates a huge amount of 1-10 microns of ultra-high-speed magnetized fog droplets to form a high-speed gas-fog magnetization coupling group fog curtain, effectively capturing respirable coal dust and effectively controlling the diffusion and penetration of coal dust.

New Technologye Dust control

Water saving Energy saving Strong stability of high efficiency, High-tech Atomization technology

The whole system consists: sensing subsystem, intelligent control subsystem,

spray subsystem, data transmission subsystem and data processing subsystem.

The purpose of coal mine dust online monitoring and spray dust removal system is to realize real-time monitoring of dust concentration, and linkage

with automatic spray control to achieve effective spray dust removal.

Advantage of Magnetized Supersonic Spray Dust Removal Solution

Siphon saves electricity better

Supersonic anti-gravity siphon magnetic fog

nozzle, creating a large number of ultra-high

-speed magnetized fog droplets to form high

-speed gas-fog magnetization coupling group

fog curtain, effectively capturing respirable

coal dust and effectively controlling the

diffusion and penetration of coal dust.

Unblocked Unique Nozzle

Self-imbibition water injection avoids large

solid particles entering the nozzle due to the

original pressure water injection method ,

and the ultrasonic vibration generated by

atomization can also prevent the deposition

of chemical precipitation of carbonate and

other salts and clog the nozzle.

Save Water and Gas

Compared with traditional ultrasonic atomiza

tion, it consumes less power. When reaching

the same dust removal efficien, at 0.4 Mpa,

the water consumption is 0.05 L per minute ,

and one ton of water can run continuously for

333 hours.

Better dust removal effect

Compared with the traditional ultrasonic

atomizing nozzle, the dust removal rate

is twice that of the traditional ultrasonic

atomizing method.

Better atomization

Due to the characteristics of supersonic

crushing, the speed of droplets inside the

nozzle can reach supersonic speed, although

the large attenuation after ejection is still

several times more than that of traditional

spray.

Lower Pressure Require

When the gas path pressure is above 0.3 Mpa,

the gravity siphon can be reversed , and when

the gas path is 0.4 Mpa, the vacuum siphon

pressure is 0.03 Mpa, also the atomization is

stable.

New Technologye Dust control

The water flow can be automatically adjusted according to the air pressure , and it can continue to run when the air pressure is insufficient and unstable.

Magnetized water dust removal is widely used in dust control of coal mining, excavation, transportation and other links, power plants, ports, and workplaces that produce a lot of dust pollution.